Rubber Base for Survey Poles Standing on Hard Flat Ground

• Customization: Available
• Transport Package: Carton
• Specification: small
• Model NO.: PGB24
• Trademark: no
• Origin: China

Product Description

Product Description

 

This device is very helpful to put the surveying poles on the hard and slippery flat ground. There are three parts in total. PGB24-1 is the base which has a M10 thread on top, it can be jointed with the other two parts. The part PGB24-2 has 5/8" thread on the top, it can used for the surveying poles which has a 5/8" thread hole on bottom. The part PGB24-3 has 25mm hole into which the LEICA GLS11 or other surveying poles can be put and fixed by the screw. There is rubber inside PGB24-3 to protect the surface of the surveying poles.

 

PGB24-1:

*Rubber base for hard flat ground                         

*The top adaptor can be rotated on the flat.                  

*Thread on top of the adaptor:M10 x10              

*Max Angle:43ºfrom vertical                                                   

*Base plate diameter:50mm                                                      

*Height: 40mm                                                          

*Net weight: 30g

 

PGB24-2:

*Adaptor with thread M10 female and 5/8" x17 male                                    

*It can be jointed with PGB24-1,then the poles can be mounted on the 5/8" thread                                                 
*Height: 40mm                                                       

*Net weight:40g

 

PGB24-3:

*Adaptor for prism pole GLS11                                   

*It can be jointed with PGB24-1, then pole can be fixed to the hole of the adaptor.                     

*Max. diameter of the hole:25mm                                       

*Outer diameter:39mm                                                                                      

*Height: 150mm                                                       

*Net weight:300g

This device is very helpful to put the surveying poles on the hard and slippery flat ground. There are three parts in total. PGB24-1 is the base which has a M10 thread on top, it can be jointed with the other two parts. The part PGB24-2 has 5/8" thread on the top, it can used for the surveying poles which has a 5/8" thread hole on bottom. The part PGB24-3 has 25mm hole into which the LEICA GLS11 or other surveying poles can be put and fixed by the screw. There is rubber inside PGB24-3 to protect the surface of the surveying poles.